Hi heat is a durable enamel formulated
to resist temperatures of up to 350 degrees
celsius.
Hi heat can be used on exhausts,
manifolds and various other heated
applications.
Hi heat does not gloss, but has a velvet finish.
Hi-Heat Black Spray Paint 250ml
R154.00
Hi heat is a durable enamel formulated
to resist temperatures of up to 350 degrees
celsius.
Hi heat can be used on exhausts,
manifolds and various other heated
applications.
Hi heat does not gloss, but has a velvet finish.
Description
Additional information
| Weight | 0.3 kg |
|---|
Reviews (0)
You must be logged in to post a review.
Related products
Aqua Matt Full Fibre Waterproofing 5Lt
DESCRIPTION
Aqua Matt waterproofing has one of the
highest solid, full fibre, content on the
market at almost 60%, forming a paste,
yet paint on consistency product for all
waterproofing needs.
Aqua matt is an acrylic coplymer coating
and is one of the few that, once cured,
can withstand complete submersion in
water.
FEATURES
Aqua Matt creates a high quality,
fibre re-enforced acrylic waterproofing
compound which:
- Is a paste consistence therefore able
to fill gaps and fine cracks.
- Can withstand complete submersion in
water
- Is able to form a seamless water proofing
system with no joints.
- Is easily applied with a paint brush or
roller.
- Is designed specifically for the function
of waterproofing and unless there are two
different substrates where excessive
movement is expected, no waterproofing
membrance is required.
e.g. Parapet walls, window cills or roof
ridging.
- Fillers reduce the temperature underneath
the surface it is applied to by as much as
30%.
- Fillers reduce heat absorption reducing
long term product fatigue.
- Has been designed to stretch and is
water and water-vapour resistant.
- Aqua Matt is off white in colour, and can
be used on its own, or can be coated with
any suitable coating.
AVAILABLE in 1lt, 5lt and 20lt
Enviro PRIME (Metal 250hr+ Salt Spray Anti-Corrosive) 20Lt
DESCRIPTION
EnviroPrime is a water-based, red oxide in
colour paint used for priming mild steel and
galvanised iron. Enviroprime offers the latest
technology in anti-corrosive additives making
it a Zinc Phosphate free, water based,
non-Toxic anti corrosive steel and galvanised
iron primer that is environmentally friendly
with a Greenstar VOC rating for priming steel.
On prepared mild steel, Enviroprime easily
passes 250 hours of salt spray testing
showing no sign of rust creep from the scribe
line. (Independent test)
At 500 hours, rust creep has started from the
scribe line inward but still showed good overall
protection and adhesion. This makes
Enviroprime a leading water-based
anti-corrosive steel primer in South Africa.
FEATURES
EnviroPrime metal primer is a modified acrylic
bound primer that:
Incorporates various anti-corrosive pigments.
Is used for the priming of structural steel as
well as galvanised iron, combating white and
red rust.
Dries quickly to a hard finish with excellent
adhesion and good acid rain resistance.
Is low in odour while being nontoxic and
environmentally friendly.
AVAILABLE IN
1Lt 5Lt and 20Lt
A 20Lt will cover 200 to 240 sqm per coat
Floor Coat Grey Polyurethane Medium Gloss 1Lt
DESCRIPTION
Floor Coat Alkyd Polyurethane Floor Paint
has been formulated for light industrial
concrete floors including for domestic
use. It dries to a tough durable finish
with excellent adhesion.
It is supplied in a range of standard colours
and has a medium gloss finish.
FEATURES
- Tough, durable, thin film floor paint
system.
- Designed to be resistant to most
household chemicals.
- Single pack. (requires no catalyst)
- Excellent stain resistance and easy to
clean.
- Provides a medium gloss finish for
practicality and cleanliness.
- An economical, hard wearing, hygienic,
and fashionable coating.
AREAS OF USE
- Interior concrete floors
- Interior wooden floors
- Interior porous tile floors
SURFACE PREPARATION
EXISTING DRY/CURED UNPAINTED
FLOORS
1. Ensure floor is cured with a moisture
level below 15%. (Do not paint wet floors).
2. Clean floor and degrease if necessary.
(Pink All Purpose Cleaner)
3. Acid wash floor with undiluted acid
(spirits of salt) and rinse well
(immediately) with freshwater. There
must be no acid left on the floor.
Allow to dry.
4. Apply the first coat of FloorCoat DILUTED
10% with mineral turpentine. Allow 6 or
longer hours to dry @ 25 deg C.
5. Apply second coat of UNDILUTED Floor
Coat.
Allow to dry.
USEFUL NOTES
Floor Coat can get traffic after 18hrs, but
will only reach full cure and hardness after
7 days.
With polyurethanes, it is far better to apply
more thin coats than fewer thick coats. Its
important to spread the coat using a short
hair mohair roller.
The viscosity of Floor Coat is designed to
give a melted flow finish, so do not over
work (up and down) on application.
AVAILABLE IN
1Lt and 5Lt
COVERAGE
1Lt will cover 5 to 6 sqm for the two
coats required.
5Lt will cover 25 to 30 sqm for the two
coats required.
Rhino Seal – Penetrating (fine particle size) Sealer 1Lt
RHINO SEAL is a fine particle size binding
liquid, especially designed to penetrate
deeply into hard wall and fine powder
surfaces.
Rhino Seal is used for priming gypsum plaster
finishes, old chalking paint, new precast
concrete, hard surfaces e.g. super wood
or hardwood, or any absorbent
new or existing surfaces before painting.
RhinoSeal has excellent alkali and
efflorescence resistance and has been tested
to penetrate 120 microns into chalking
material in one coat with complete binding
of the loose friable material to the underlying
surface on drying.
FEATURES
- Deep penetrating - fine particle size.
- Suitable for fine powder as well as super
fine hard surfaces where adhesion of paint is
difficult.e.g Super wood and hard woods.
- Also used as a sealer on soft woods such as
pine, and like, before painting.
- Suitable for binding existing poor paint coatings
before overcoating.
- High binding properties ensuring a solid base
below your new coatings.
- Low odour
- Alkali resistant
- Fast drying.
RHINO SEAL is economical and a must use
product on hard, poor and powdery surfaces.
AVAILABLE in 1lt, 5lt and 20lt
SPREAD RATES
A 1lt will cover approx 10 to 12
sqm on a hard surface (like wood) and
approx 7 to 9 sqm on a porous surface -
(subject to porosity)
* Please note that standard water based
products will not penetrate fine powder and will
sit on the surface without effectively binding
the surface to a depth.
* RHINO SEAL contains 30% mineral
turpentine and cannot be diluted with water.
Rhino Seal – Penetrating (fine particle size) Sealer 5Lt
RHINO SEAL is a fine particle size binding
liquid, especially designed to penetrate
deeply into hard wall and fine powder
surfaces.
Rhino Seal is used for priming gypsum plaster
finishes, old chalking paint, new precast
concrete, hard surfaces e.g. super wood
or hardwood, or any absorbent
new or existing surfaces before painting.
RhinoSeal has excellent alkali and
efflorescence resistance and has been tested
to penetrate 120 microns into chalking
material in one coat with complete binding
of the loose friable material to the underlying
surface on drying.
FEATURES
- Deep penetrating - fine particle size.
- Suitable for fine powder as well as super
fine hard surfaces where adhesion of paint is
difficult.e.g Super wood and hard woods.
- Also used as a sealer on soft woods such as
pine, and like, before painting.
- Suitable for binding existing poor paint coatings
before overcoating.
- High binding properties ensuring a solid base
below your new coatings.
- Low odour
- Alkali resistant
- Fast drying.
RHINO SEAL is economical and a must use
product on hard, poor and powdery surfaces.
AVAILABLE in 1lt, 5lt and 20lt
SPREAD RATES
A 5lt will cover approx 50 to 60 sqm on a
hard surface (like wood) and approx
35 to 45 sqm on a porous surface -
(subject to porosity)
* Please note that standard water based
products will not penetrate fine powder and will
sit on the surface without effectively binding
the surface to a depth.
* RHINO SEAL contains 30% mineral
turpentine and cannot be diluted with water.
Ruscon New Tech resin bound red rustconverter 20Lt
DESCRIPTION
Ruscon New Tech now incorporates the
latest technology developed for rust
conversion.
Formulated to convert rust on mild steel and
galvanised iron into a tough resin coated,
chemically bonded surface, which can be
overcoated without removing rust back to
bright steel. Ruscon New Tech is non-toxic with
a VOC below 5%, making it an easy and
environmetally friendly option.
FEATURES
-It is specially formulated to convert red rust
on mild steel and galvanized iron into a tough
resin coated converted surface which can be
over-coated without removing rust back to bright
steel.
AREAS OF USE
Rusted mild steel or galvanized iron.
SURFACE PREPARATION AND APPLICATION
MILD STEEL AND GALVANISED IRON
1. By wire brush, remove only loose or flaking
rust. It is important not to remove all rust.
2. Wipe the treated area down to remove all dirt
and sanding dust.
3. Apply using a brush, roller or airless spray.
4. Apply one thin, even coat of Ruscon, ensuring
that you cover all rust completely.
Spot prime rust only.
5. Allow 24 hours curing @25C before
overcoating.
APPLICATION EQUIPMENT
Apply by Brush roller or airless spray
CLEANING EQUIPMENT
Clean all equipment with water immediately
after use.
SPREAD RATE
20Lt will cover aprox 240sqm
AVAILABLE IN
1Lt 5Lt and 20Lt
Ruscon New Tech resin bound red rustconverter 5Lt
DESCRIPTION
Ruscon New Tech now incorporates the
latest technology developed for rust
conversion.
Formulated to convert rust on mild steel and
galvanised iron into a tough resin coated,
chemically bonded surface, which can be
overcoated without removing rust back to
bright steel. Ruscon New Tech is non-toxic with
a VOC below 5%, making it an easy and
environmetally friendly option.
FEATURES
-It is specially formulated to convert red rust
on mild steel and galvanized iron into a tough
resin coated converted surface which can be
over-coated without removing rust back to bright
steel.
AREAS OF USE
Rusted mild steel or galvanized iron.
SURFACE PREPARATION AND APPLICATION
MILD STEEL AND GALVANISED IRON
1. By wire brush, remove only loose or flaking
rust. It is important not to remove all rust.
2. Wipe the treated area down to remove all dirt
and sanding dust.
3. Apply using a brush, roller or airless spray.
4. Apply one thin, even coat of Ruscon, ensuring
that you cover all rust completely.
Spot prime rust only.
5. Allow 24 hours curing @25C before
overcoating.
APPLICATION EQUIPMENT
Apply by Brush roller or airless spray
CLEANING EQUIPMENT
Clean all equipment with water immediately
after use.
SPREAD RATE
5Lt will cover aprox 60sqm
AVAILABLE IN
1Lt 5Lt and 20Lt
Sealermix Plaster Primer and Sealer (Lightly Pigmented) 20Lt
DESCRIPTION
Sealermix is a lightly pigmented, alkali
resistant plaster primer and sealer that will
penetrate plaster and effectively bind and
seal the plaster.
Sealermix is a must for scratch plaster
which is highly porous and that requires
binding.(river sand in mix)
FEATURES
-Sealermix reduces the high absorption of
paint on plaster.
-Sealermix will NOT powder and forms a
solid and sound foundation for subsequent
coats.
-Good alkali resistance.
-Sealermix has excellent binding power.
-Sealermix improves the quality of the plaster
and the paint system.
- Sealermix is slightly pigmented to assist
with the hiding power of subsequent coats.
- Sealermix can be applied to all types of
plaster, cement or concrete.
AVAILABLE IN
5Lt and 20Lt
TECHNICAL SPECIFICATIONS
Vehicle Type: Modified Acrylic
Solvent: Water
Enviro Rating: Conforms to EU 2010 V.O.C.
rules
Dilution / Thinning: This product is NOT to be
thinned
Theoretical Spread Rate: 8m per litre
Apply with Brush, Roller or Spray
Drying time: @ 25C 20 minutes. Allow 45
minutes before over coating.
Wash ability: N/A
Elongation: OK
Pigment: Pigmented
Solids Volume: N/A
Flexibility: Good
Colour: Can be tinted
Finish: Matt
Storage: Cool, dry place
Over coating: Top coat of your choice
Packaging 5L and 20L
Note: Sealermix is slightly pigmented
and therefore must be properly mixed
before application.
Reviews
There are no reviews yet.