Cementek UV Clear Liquid Cement Sealer & Hardener 5Lt

DESCRIPTION
CEMENTEK is a sealer for cement based
surfaces providing a hard wearing dust free
finish that can withstand traffic, weathering
and Ultra Violet (UV)
CEMENTEK is a combination curing,
sealing, dust-proofing and hardening for
cement and cementitious surfaces – like
your steel floated floors, counter tops and
bathroom wall and floors.
CEMENTEK will adhere to damp surfaces
and also effectively stops rising moisture.
CEMENTEK is clear (not a syrup colour)
and can withstand UV and complete
submersion in water.
CEMENTEK will not yellow with time.
CEMENTEK can be used as a primer
(under new coatings to hold back damp)
or on its own as a semi gloss finish for
your cement finish project.
Can be used in ponds and dams as a
primer (to stop moisture behind our
waterproofing AQUA SEAL) or on its own
as a natural finish.
CEMENTEK is deep penetrating to form
part of your surface, rather than sitting
on top of your surface and is a concrete
densifier as opposed to simply a sealer.
CEMENTEK is a clear coat and cannot
be tinted. Cementek is to be applied
to a prepared new or existing surface.
Should one want to tint or colour the
surface before the application of
Cementek, ONLY our PRISTINA
paint should be used as it is breathable
allowing CEMENTEK to penetrate.
PRISTINA can be applied as a wash
(diluted 1:3 with water onto a pre wet
surface) or on its own (or a combination
of both to create depth to a solid colour)
FEATURES
CEMENTEK allows for:
– Application to damp uncured cement
without the risk of ensuring that the
surface is less than a certain % dry.
Can screed today and apply Cementek
the following day which will give a lighter
look.
– The curing and sealing of concrete is
accomplished at once.
– Can be applied to old or new
cementitious surfaces.
– Penetrates and hardens the surface.
– No etching of the surface required
to ensure sound adhesion.
– CEMENTEK ensures that the
concrete/cement reaches its full Mpa
once cured.
– Hard-wearing of concrete floors. Stops
new concrete floors from dusting.
– Allows to paint within 48 hours of
plastering.
– Excellent water and U.V. protection
CEMENTEK other uses
– To seal bricks, concrete floors and
other porous surfaces.
– As a sealer on damp plaster without
a normal 28-day curing period, before
painting.
– As a sealer on green (not yet cured)
flat deck roofing before waterproofing
allowing the waterproofing to be applied
after 48 hours instead of normal 28-day
curing periods.
COVERAGE
On a steel floated floor, a minimum of
three coats is required (as Cementek
penetrates the surface)
A 1lt, for the three coats will cover
aprox 3 to 4sqm.
A 5lt for the three coats will cover
aprox 15 to 20sqm.
A 20lt for the three coats will cover
aprox 60 to 80sqm.
Rough surfaces will use more product.
Cementek will highlight the surface it is
applied to, and will give a semi gloss
finish. Applying more coats will improve
the sheen.
A fine hair roller (mohair) or similar is
to be used, and product is to be spread.
TAP the roller regulary on its side to
remove product from the core of the
roller to stop line spillage on application.
Allow a minimum of 4 hours curing
between coats.
USEFUL HINTS
One can add white (or other) cement to
your screed topping to get a lighter or
different colour finish.
AVAILABILTY
CEMENTEK is shipped thoughout South
Africa and directly to you at a nominal
R110 per order with a nominal additional
cost for orders over 30kg’s.
This fee is applicable to all other
products on our site.
AVAILABLE in 1lt 5lt and 20lt
CEMENTEK makes use of High Aromatic
White Spirits (HAWS) which ensures the
resin is able to penetrate and is soluble
for application.
CLEANING
Clean all equipment with lacquer thinners.