Adds a semi-transparent coating for
decoration or privacy.
Apply to glass or mirrors.
Creates the look of custom etched
glass when applied with stencils.
For decorating or privacy.
Indoor use only.
Recoating to be done a few
minutes apart.
Frosted Glass Spray Paint 312g
R200.00
Adds a semi-transparent coating for
decoration or privacy.
Apply to glass or mirrors.
Creates the look of custom etched
glass when applied with stencils.
For decorating or privacy.
Indoor use only.
Recoating to be done a few
minutes apart.
Description
Additional information
| Weight | 0.32 kg |
|---|---|
| Dimensions | 0.34 cm |
Reviews (0)
You must be logged in to post a review.
Related products
Aqua Matt Full Fibre Waterproofing 1Lt
DESCRIPTION
Aqua Matt waterproofing has one of the
highest solid, full fibre, content on the
market at almost 60%, forming a paste,
yet paint on consistency product for all
waterproofing needs.
Aqua matt is an acrylic coplymer coating
and is one of the few that, once cured,
can withstand complete submersion in
water.
FEATURES
Aqua Matt creates a high quality,
fibre re-enforced acrylic waterproofing
compound which:
- Is a paste consistence therefore able
to fill gaps and fine cracks.
- Can withstand complete submersion in
water
- Is able to form a seamless water proofing
system with no joints.
- Is easily applied with a paint brush or
roller.
- Is designed specifically for the function
of waterproofing and unless there are two
different substrates where excessive
movement is expected, no waterproofing
membrance is required.
e.g. Parapet walls, window cills or roof
ridging.
- Fillers reduce the temperature underneath
the surface it is applied to by as much as
30%.
- Fillers reduce heat absorption reducing
long term product fatigue.
- Has been designed to stretch and is
water and water-vapour resistant.
- Aqua Matt is off white in colour, and can
be used on its own, or can be coated with
any suitable coating.
AVAILABLE in 1lt, 5lt and 20lt
Aqua Matt Full Fibre Waterproofing 5Lt
DESCRIPTION
Aqua Matt waterproofing has one of the
highest solid, full fibre, content on the
market at almost 60%, forming a paste,
yet paint on consistency product for all
waterproofing needs.
Aqua matt is an acrylic coplymer coating
and is one of the few that, once cured,
can withstand complete submersion in
water.
FEATURES
Aqua Matt creates a high quality,
fibre re-enforced acrylic waterproofing
compound which:
- Is a paste consistence therefore able
to fill gaps and fine cracks.
- Can withstand complete submersion in
water
- Is able to form a seamless water proofing
system with no joints.
- Is easily applied with a paint brush or
roller.
- Is designed specifically for the function
of waterproofing and unless there are two
different substrates where excessive
movement is expected, no waterproofing
membrance is required.
e.g. Parapet walls, window cills or roof
ridging.
- Fillers reduce the temperature underneath
the surface it is applied to by as much as
30%.
- Fillers reduce heat absorption reducing
long term product fatigue.
- Has been designed to stretch and is
water and water-vapour resistant.
- Aqua Matt is off white in colour, and can
be used on its own, or can be coated with
any suitable coating.
AVAILABLE in 1lt, 5lt and 20lt
Floor Coat Claytile Polyurethane Medium Gloss 5Lt
DESCRIPTION
Floor Coat Alkyd Polyurethane Floor Paint
has been formulated for light industrial
concrete floors including for domestic
use. It dries to a tough durable finish
with excellent adhesion.
It is supplied in a range of standard colours
and has a medium gloss finish.
FEATURES
- Tough, durable, thin film floor paint
system.
- Designed to be resistant to most
household chemicals.
- Single pack. (requires no catalyst)
- Excellent stain resistance and easy to
clean.
- Provides a medium gloss finish for
practicality and cleanliness.
- An economical, hard wearing, hygienic,
and fashionable coating.
AREAS OF USE
- Interior concrete floors
- Interior wooden floors
- Interior porous tile floors
SURFACE PREPARATION
EXISTING DRY/CURED UNPAINTED
FLOORS
1. Ensure floor is cured with a moisture
level below 15%. (Do not paint wet floors).
2. Clean floor and degrease if necessary.
(Pink All Purpose Cleaner)
3. Acid wash floor with undiluted acid
(spirits of salt) and rinse well
(immediately) with freshwater. There
must be no acid left on the floor.
Allow to dry.
4. Apply the first coat of FloorCoat DILUTED
10% with mineral turpentine. Allow 6 or
longer hours to dry @ 25 deg C.
5. Apply second coat of UNDILUTED Floor
Coat.
Allow to dry.
USEFUL NOTES
Floor Coat can get traffic after 18hrs, but
will only reach full cure and hardness after
7 days.
With polyurethanes, it is far better to apply
more thin coats than fewer thick coats. Its
important to spread the coat using a short
hair mohair roller.
The viscosity of Floor Coat is designed to
give a melted flow finish, so do not over
work (up and down) on application.
AVAILABLE IN
1Lt and 5Lt
COVERAGE
1Lt will cover 5 to 6 sqm for the two
coats required.
5Lt will cover 25 to 30 sqm for the two
coats required.
Floor Coat Grey Polyurethane Medium Gloss 5Lt
DESCRIPTION
Floor Coat Alkyd Polyurethane Floor Paint
has been formulated for light industrial
concrete floors including for domestic
use. It dries to a tough durable finish
with excellent adhesion.
It is supplied in a range of standard colours
and has a medium gloss finish.
FEATURES
- Tough, durable, thin film floor paint
system.
- Designed to be resistant to most
household chemicals.
- Single pack. (requires no catalyst)
- Excellent stain resistance and easy to
clean.
- Provides a medium gloss finish for
practicality and cleanliness.
- An economical, hard wearing, hygienic,
and fashionable coating.
AREAS OF USE
- Interior concrete floors
- Interior wooden floors
- Interior porous tile floors
SURFACE PREPARATION
EXISTING DRY/CURED UNPAINTED
FLOORS
1. Ensure floor is cured with a moisture
level below 15%. (Do not paint wet floors).
2. Clean floor and degrease if necessary.
(Pink All Purpose Cleaner)
3. Acid wash floor with undiluted acid
(spirits of salt) and rinse well
(immediately) with freshwater. There
must be no acid left on the floor.
Allow to dry.
4. Apply the first coat of FloorCoat DILUTED
10% with mineral turpentine. Allow 6 or
longer hours to dry @ 25 deg C.
5. Apply second coat of UNDILUTED Floor
Coat.
Allow to dry.
USEFUL NOTES
Floor Coat can get traffic after 18hrs, but
will only reach full cure and hardness after
7 days.
With polyurethanes, it is far better to apply
more thin coats than fewer thick coats. Its
important to spread the coat using a short
hair mohair roller.
The viscosity of Floor Coat is designed to
give a melted flow finish, so do not over
work (up and down) on application.
AVAILABLE IN
1Lt and 5Lt
COVERAGE
1Lt will cover 5 to 6 sqm for the two
coats required.
5Lt will cover 25 to 30 sqm for the two
coats required.
Floor Coat Hacienda Polyurethane Medium Gloss 1Lt
DESCRIPTION
Floor Coat Alkyd Polyurethane Floor Paint
has been formulated for light industrial
concrete floors including for domestic
use. It dries to a tough durable finish
with excellent adhesion.
It is supplied in a range of standard colours
and has a medium gloss finish.
FEATURES
- Tough, durable, thin film floor paint
system.
- Designed to be resistant to most
household chemicals.
- Single pack. (requires no catalyst)
- Excellent stain resistance and easy to
clean.
- Provides a medium gloss finish for
practicality and cleanliness.
- An economical, hard wearing, hygienic,
and fashionable coating.
AREAS OF USE
- Interior concrete floors
- Interior wooden floors
- Interior porous tile floors
SURFACE PREPARATION
EXISTING DRY/CURED UNPAINTED
FLOORS
1. Ensure floor is cured with a moisture
level below 15%. (Do not paint wet floors).
2. Clean floor and degrease if necessary.
(Pink All Purpose Cleaner)
3. Acid wash floor with undiluted acid
(spirits of salt) and rinse well
(immediately) with freshwater. There
must be no acid left on the floor.
Allow to dry.
4. Apply the first coat of FloorCoat DILUTED
10% with mineral turpentine. Allow 6 or
longer hours to dry @ 25 deg C.
5. Apply second coat of UNDILUTED Floor
Coat.
Allow to dry.
USEFUL NOTES
Floor Coat can get traffic after 18hrs, but
will only reach full cure and hardness after
7 days.
With polyurethanes, it is far better to apply
more thin coats than fewer thick coats. Its
important to spread the coat using a short
hair mohair roller.
The viscosity of Floor Coat is designed to
give a melted flow finish, so do not over
work (up and down) on application.
AVAILABLE IN
1Lt and 5Lt
COVERAGE
1Lt will cover 5 to 6 sqm for the two
coats required.
5Lt will cover 25 to 30 sqm for the two
coats required.
Rhino Seal – Penetrating (fine particle size) Sealer 20Lt
RHINO SEAL is a fine particle size binding
liquid, especially designed to penetrate
deeply into hard wall and fine powder
surfaces.
Rhino Seal is used for priming gypsum plaster
finishes, old chalking paint, new precast
concrete, hard surfaces e.g. super wood
or hardwood, or any absorbent
new or existing surfaces before painting.
RhinoSeal has excellent alkali and
efflorescence resistance and has been tested
to penetrate 120 microns into chalking
material in one coat with complete binding
of the loose friable material to the underlying
surface on drying.
FEATURES
- Deep penetrating - fine particle size.
- Suitable for fine powder as well as super
fine hard surfaces where adhesion of paint is
difficult.e.g Super wood and hard woods.
- Also used as a sealer on soft woods such as
pine, and like, before painting.
- Suitable for binding existing poor paint coatings
before overcoating.
- High binding properties ensuring a solid base
below your new coatings.
- Low odour
- Alkali resistant
- Fast drying.
RHINO SEAL is economical and a must use
product on hard, poor and powdery surfaces.
AVAILABLE in 1lt, 5lt and 20lt
SPREAD RATES
A 20lt will cover approx 200 to 240
sqm on a hard surface (like wood) and
approx 140 to 180 sqm on a porous surface -
(subject to porosity)
* Please note that standard water based
products will not penetrate fine powder and will
sit on the surface without effectively binding
the surface to a depth.
* RHINO SEAL contains 30% mineral
turpentine and cannot be diluted with water.
Rhino Seal – Penetrating (fine particle size) Sealer 1Lt
RHINO SEAL is a fine particle size binding
liquid, especially designed to penetrate
deeply into hard wall and fine powder
surfaces.
Rhino Seal is used for priming gypsum plaster
finishes, old chalking paint, new precast
concrete, hard surfaces e.g. super wood
or hardwood, or any absorbent
new or existing surfaces before painting.
RhinoSeal has excellent alkali and
efflorescence resistance and has been tested
to penetrate 120 microns into chalking
material in one coat with complete binding
of the loose friable material to the underlying
surface on drying.
FEATURES
- Deep penetrating - fine particle size.
- Suitable for fine powder as well as super
fine hard surfaces where adhesion of paint is
difficult.e.g Super wood and hard woods.
- Also used as a sealer on soft woods such as
pine, and like, before painting.
- Suitable for binding existing poor paint coatings
before overcoating.
- High binding properties ensuring a solid base
below your new coatings.
- Low odour
- Alkali resistant
- Fast drying.
RHINO SEAL is economical and a must use
product on hard, poor and powdery surfaces.
AVAILABLE in 1lt, 5lt and 20lt
SPREAD RATES
A 1lt will cover approx 10 to 12
sqm on a hard surface (like wood) and
approx 7 to 9 sqm on a porous surface -
(subject to porosity)
* Please note that standard water based
products will not penetrate fine powder and will
sit on the surface without effectively binding
the surface to a depth.
* RHINO SEAL contains 30% mineral
turpentine and cannot be diluted with water.
Ruscon New Tech resin bound red rustconverter 1Lt
DESCRIPTION
Ruscon New Tech now incorporates the
latest technology developed for rust
conversion.
Formulated to convert rust on mild steel and
galvanised iron into a tough resin coated,
chemically bonded surface, which can be
overcoated without removing rust back to
bright steel. Ruscon New Tech is non-toxic with
a VOC below 5%, making it an easy and
environmetally friendly option.
FEATURES
-It is specially formulated to convert red rust
on mild steel and galvanized iron into a tough
resin coated converted surface which can be
over-coated without removing rust back to bright
steel.
AREAS OF USE
Rusted mild steel or galvanized iron.
SURFACE PREPARATION AND APPLICATION
MILD STEEL AND GALVANISED IRON
1. By wire brush, remove only loose or flaking
rust. It is important not to remove all rust.
2. Wipe the treated area down to remove all dirt
and sanding dust.
3. Apply using a brush, roller or airless spray.
4. Apply one thin, even coat of Ruscon, ensuring
that you cover all rust completely.
Spot prime rust only.
5. Allow 24 hours curing @25C before
overcoating.
APPLICATION EQUIPMENT
Apply by Brush roller or airless spray
CLEANING EQUIPMENT
Clean all equipment with water immediately
after use.
SPREAD RATE
1Lt will cover aprox 12sqm
AVAILABLE IN
1Lt 5Lt and 20Lt
Reviews
There are no reviews yet.