Adds a semi-transparent coating for
decoration or privacy.
Apply to glass or mirrors.
Creates the look of custom etched
glass when applied with stencils.
For decorating or privacy.
Indoor use only.
Recoating to be done a few
minutes apart.
Frosted Glass Spray Paint 312g
R200.00
Adds a semi-transparent coating for
decoration or privacy.
Apply to glass or mirrors.
Creates the look of custom etched
glass when applied with stencils.
For decorating or privacy.
Indoor use only.
Recoating to be done a few
minutes apart.
Description
Additional information
| Weight | 0.32 kg |
|---|---|
| Dimensions | 0.34 cm |
Reviews (0)
You must be logged in to post a review.
Related products
Floor Coat Hacienda Polyurethane Medium Gloss 5Lt
DESCRIPTION
Floor Coat Alkyd Polyurethane Floor Paint
has been formulated for light industrial
concrete floors including for domestic
use. It dries to a tough durable finish
with excellent adhesion.
It is supplied in a range of standard colours
and has a medium gloss finish.
FEATURES
- Tough, durable, thin film floor paint
system.
- Designed to be resistant to most
household chemicals.
- Single pack. (requires no catalyst)
- Excellent stain resistance and easy to
clean.
- Provides a medium gloss finish for
practicality and cleanliness.
- An economical, hard wearing, hygienic,
and fashionable coating.
AREAS OF USE
- Interior concrete floors
- Interior wooden floors
- Interior porous tile floors
SURFACE PREPARATION
EXISTING DRY/CURED UNPAINTED
FLOORS
1. Ensure floor is cured with a moisture
level below 15%. (Do not paint wet floors).
2. Clean floor and degrease if necessary.
(Pink All Purpose Cleaner)
3. Acid wash floor with undiluted acid
(spirits of salt) and rinse well
(immediately) with freshwater. There
must be no acid left on the floor.
Allow to dry.
4. Apply the first coat of FloorCoat DILUTED
10% with mineral turpentine. Allow 6 or
longer hours to dry @ 25 deg C.
5. Apply second coat of UNDILUTED Floor
Coat.
Allow to dry.
USEFUL NOTES
Floor Coat can get traffic after 18hrs, but
will only reach full cure and hardness after
7 days.
With polyurethanes, it is far better to apply
more thin coats than fewer thick coats. Its
important to spread the coat using a short
hair mohair roller.
The viscosity of Floor Coat is designed to
give a melted flow finish, so do not over
work (up and down) on application.
AVAILABLE IN
1Lt and 5Lt
COVERAGE
1Lt will cover 5 to 6 sqm for the two
coats required.
5Lt will cover 25 to 30 sqm for the two
coats required.
PlasterPrimer Premium 1Lt
DESCRIPTION
Deep penetrating PlasterPrime Premium
is a fine particle size, water-borne acrylic
with excellent alkali resistance,
water-resistance, and adhesion.
Fine particles allows for better penetration
and in depth binding.
It is off-white in colour and has been formulated
as a primer for Gypsum plaster (RhinoLite) or
cement plaster.
PlasterPrime Premium is formulated using the
latest environmentally-friendly technology.
FEATURES
It is alkali resistant.
It is water-resistant.
It has excellent adhesion.
It has very good opacity.
Improves the quality of plaster or rhinolite
It does not require any subsequent undercoats
when used on smooth, even-textured plaster.
It makes use of the latest H2O Technology for
green products.
It has a low V.O.C. count and is low in odour.
AVAILABLE IN
1lt 5lt and 20lt
PlasterPrimer Premium 20lt
DESCRIPTION
Deep penetrating PlasterPrime Premium
is a fine particle size, water-borne acrylic
with excellent alkali resistance,
water-resistance, and adhesion.
Fine particles allows for better penetration
and in depth binding.
It is off-white in colour and has been formulated
as a primer for Gypsum plaster (RhinoLite) or
cement plaster.
PlasterPrime Premium is formulated using the
latest environmentally-friendly technology.
FEATURES
It is alkali resistant.
It is water-resistant.
It has excellent adhesion.
It has very good opacity.
Improves the quality of plaster or rhinolite
It does not require any subsequent undercoats
when used on smooth, even-textured plaster.
It makes use of the latest H2O Technology for
green products.
It has a low V.O.C. count and is low in odour.
AVAILABLE IN
1lt 5lt and 20lt
Rhino Seal – Penetrating (fine particle size) Sealer 20Lt
RHINO SEAL is a fine particle size binding
liquid, especially designed to penetrate
deeply into hard wall and fine powder
surfaces.
Rhino Seal is used for priming gypsum plaster
finishes, old chalking paint, new precast
concrete, hard surfaces e.g. super wood
or hardwood, or any absorbent
new or existing surfaces before painting.
RhinoSeal has excellent alkali and
efflorescence resistance and has been tested
to penetrate 120 microns into chalking
material in one coat with complete binding
of the loose friable material to the underlying
surface on drying.
FEATURES
- Deep penetrating - fine particle size.
- Suitable for fine powder as well as super
fine hard surfaces where adhesion of paint is
difficult.e.g Super wood and hard woods.
- Also used as a sealer on soft woods such as
pine, and like, before painting.
- Suitable for binding existing poor paint coatings
before overcoating.
- High binding properties ensuring a solid base
below your new coatings.
- Low odour
- Alkali resistant
- Fast drying.
RHINO SEAL is economical and a must use
product on hard, poor and powdery surfaces.
AVAILABLE in 1lt, 5lt and 20lt
SPREAD RATES
A 20lt will cover approx 200 to 240
sqm on a hard surface (like wood) and
approx 140 to 180 sqm on a porous surface -
(subject to porosity)
* Please note that standard water based
products will not penetrate fine powder and will
sit on the surface without effectively binding
the surface to a depth.
* RHINO SEAL contains 30% mineral
turpentine and cannot be diluted with water.
Rhino Seal – Penetrating (fine particle size) Sealer 1Lt
RHINO SEAL is a fine particle size binding
liquid, especially designed to penetrate
deeply into hard wall and fine powder
surfaces.
Rhino Seal is used for priming gypsum plaster
finishes, old chalking paint, new precast
concrete, hard surfaces e.g. super wood
or hardwood, or any absorbent
new or existing surfaces before painting.
RhinoSeal has excellent alkali and
efflorescence resistance and has been tested
to penetrate 120 microns into chalking
material in one coat with complete binding
of the loose friable material to the underlying
surface on drying.
FEATURES
- Deep penetrating - fine particle size.
- Suitable for fine powder as well as super
fine hard surfaces where adhesion of paint is
difficult.e.g Super wood and hard woods.
- Also used as a sealer on soft woods such as
pine, and like, before painting.
- Suitable for binding existing poor paint coatings
before overcoating.
- High binding properties ensuring a solid base
below your new coatings.
- Low odour
- Alkali resistant
- Fast drying.
RHINO SEAL is economical and a must use
product on hard, poor and powdery surfaces.
AVAILABLE in 1lt, 5lt and 20lt
SPREAD RATES
A 1lt will cover approx 10 to 12
sqm on a hard surface (like wood) and
approx 7 to 9 sqm on a porous surface -
(subject to porosity)
* Please note that standard water based
products will not penetrate fine powder and will
sit on the surface without effectively binding
the surface to a depth.
* RHINO SEAL contains 30% mineral
turpentine and cannot be diluted with water.
Rhino Seal – Penetrating (fine particle size) Sealer 5Lt
RHINO SEAL is a fine particle size binding
liquid, especially designed to penetrate
deeply into hard wall and fine powder
surfaces.
Rhino Seal is used for priming gypsum plaster
finishes, old chalking paint, new precast
concrete, hard surfaces e.g. super wood
or hardwood, or any absorbent
new or existing surfaces before painting.
RhinoSeal has excellent alkali and
efflorescence resistance and has been tested
to penetrate 120 microns into chalking
material in one coat with complete binding
of the loose friable material to the underlying
surface on drying.
FEATURES
- Deep penetrating - fine particle size.
- Suitable for fine powder as well as super
fine hard surfaces where adhesion of paint is
difficult.e.g Super wood and hard woods.
- Also used as a sealer on soft woods such as
pine, and like, before painting.
- Suitable for binding existing poor paint coatings
before overcoating.
- High binding properties ensuring a solid base
below your new coatings.
- Low odour
- Alkali resistant
- Fast drying.
RHINO SEAL is economical and a must use
product on hard, poor and powdery surfaces.
AVAILABLE in 1lt, 5lt and 20lt
SPREAD RATES
A 5lt will cover approx 50 to 60 sqm on a
hard surface (like wood) and approx
35 to 45 sqm on a porous surface -
(subject to porosity)
* Please note that standard water based
products will not penetrate fine powder and will
sit on the surface without effectively binding
the surface to a depth.
* RHINO SEAL contains 30% mineral
turpentine and cannot be diluted with water.
Sealermix Plaster Primer and Sealer (Lightly Pigmented) 20Lt
DESCRIPTION
Sealermix is a lightly pigmented, alkali
resistant plaster primer and sealer that will
penetrate plaster and effectively bind and
seal the plaster.
Sealermix is a must for scratch plaster
which is highly porous and that requires
binding.(river sand in mix)
FEATURES
-Sealermix reduces the high absorption of
paint on plaster.
-Sealermix will NOT powder and forms a
solid and sound foundation for subsequent
coats.
-Good alkali resistance.
-Sealermix has excellent binding power.
-Sealermix improves the quality of the plaster
and the paint system.
- Sealermix is slightly pigmented to assist
with the hiding power of subsequent coats.
- Sealermix can be applied to all types of
plaster, cement or concrete.
AVAILABLE IN
5Lt and 20Lt
TECHNICAL SPECIFICATIONS
Vehicle Type: Modified Acrylic
Solvent: Water
Enviro Rating: Conforms to EU 2010 V.O.C.
rules
Dilution / Thinning: This product is NOT to be
thinned
Theoretical Spread Rate: 8m per litre
Apply with Brush, Roller or Spray
Drying time: @ 25C 20 minutes. Allow 45
minutes before over coating.
Wash ability: N/A
Elongation: OK
Pigment: Pigmented
Solids Volume: N/A
Flexibility: Good
Colour: Can be tinted
Finish: Matt
Storage: Cool, dry place
Over coating: Top coat of your choice
Packaging 5L and 20L
Note: Sealermix is slightly pigmented
and therefore must be properly mixed
before application.
Sealermix Plaster Primer and Sealer (Lightly Pigmented) 5Lt
DESCRIPTION
Sealermix is a lightly pigmented, alkali
resistant plaster primer and sealer that will
penetrate plaster and effectively bind and
seal the plaster.
Sealermix is a must for scratch plaster
which is highly porous and that requires
binding.(river sand in mix)
FEATURES
-Sealermix reduces the high absorption of
paint on plaster.
-Sealermix will NOT powder and forms a
solid and sound foundation for subsequent
coats.
-Good alkali resistance.
-Sealermix has excellent binding power.
-Sealermix improves the quality of the plaster
and the paint system.
- Sealermix is slightly pigmented to assist
with the hiding power of subsequent coats.
- Sealermix can be applied to all types of
plaster, cement or concrete.
AVAILABLE IN
5Lt and 20Lt
TECHNICAL SPECIFICATIONS
Vehicle Type: Modified Acrylic
Solvent: Water
Enviro Rating: Conforms to EU 2010 V.O.C.
rules
Dilution / Thinning: This product is NOT to be
thinned
Theoretical Spread Rate: 8m per litre
Apply with Brush, Roller or Spray
Drying time: @ 25C 20 minutes. Allow 45
minutes before over coating.
Wash ability: N/A
Elongation: OK
Pigment: Pigmented
Solids Volume: N/A
Flexibility: Good
Colour: Can be tinted
Finish: Matt
Storage: Cool, dry place
Over coating: Top coat of your choice
Packaging 5L and 20L
Note: Sealermix is slightly pigmented
and therefore must be properly mixed
before application.
Reviews
There are no reviews yet.