Adds a semi-transparent coating for
decoration or privacy.
Apply to glass or mirrors.
Creates the look of custom etched
glass when applied with stencils.
For decorating or privacy.
Indoor use only.
Recoating to be done a few
minutes apart.
“PlasterPrimer Premium 20lt” has been added to your cart. View cart
Frosted Glass Spray Paint 312g
R200.00
Adds a semi-transparent coating for
decoration or privacy.
Apply to glass or mirrors.
Creates the look of custom etched
glass when applied with stencils.
For decorating or privacy.
Indoor use only.
Recoating to be done a few
minutes apart.
SKU:
1903830
Categories: Decorative and Equipment, Sealers Waterproofing Primers
Description
Additional information
Weight | 0.32 kg |
---|---|
Dimensions | 0.34 cm |
Reviews (0)
Be the first to review “Frosted Glass Spray Paint 312g” Cancel reply
You must be logged in to post a review.
Related products
Acrylunder Primer,Ceiling Int.Coat White 20Lt
R998.00
DESCRIPTION
Acrylunder has excellent hiding power
with 1.7Kg of the finest pure white fillers
per 1lt making it one of the best covering
firstcoat plaster primers and ceiling coats
on the market. The binders in Acrylunder
ensures excellent adhesion as well as
forming a solid and sound coat.
FEATURES
-Excellent binding.
-Resistance to Alkali.
-Excellent hiding power.
-Good film building properties to
disguise blemishes.
-Pure white matt finish - excellent for
ceilings
AVAILABLE in 1lt, 5lt and 20lt
Aqua Matt Full Fibre Waterproofing 5Lt
R454.00
Rated 5.00 out of 5
DESCRIPTION
Aqua Matt waterproofing has one of the
highest solid, full fibre, content on the
market at almost 60%, forming a paste,
yet paint on consistency product for all
waterproofing needs.
Aqua matt is an acrylic coplymer coating
and is one of the few that, once cured,
can withstand complete submersion in
water.
FEATURES
Aqua Matt creates a high quality,
fibre re-enforced acrylic waterproofing
compound which:
- Is a paste consistence therefore able
to fill gaps and fine cracks.
- Can withstand complete submersion in
water
- Is able to form a seamless water proofing
system with no joints.
- Is easily applied with a paint brush or
roller.
- Is designed specifically for the function
of waterproofing and unless there are two
different substrates where excessive
movement is expected, no waterproofing
membrance is required.
e.g. Parapet walls, window cills or roof
ridging.
- Fillers reduce the temperature underneath
the surface it is applied to by as much as
30%.
- Fillers reduce heat absorption reducing
long term product fatigue.
- Has been designed to stretch and is
water and water-vapour resistant.
- Aqua Matt is off white in colour, and can
be used on its own, or can be coated with
any suitable coating.
AVAILABLE in 1lt, 5lt and 20lt
Cementek UV Clear Liquid Cement Sealer & Hardener 20Lt
R2,589.00
Rated 5.00 out of 5
DESCRIPTION
CEMENTEK is a sealer for cement based
surfaces providing a hard wearing dust free
finish that can withstand traffic, weathering
and Ultra Violet (UV)
CEMENTEK is a combination curing,
sealing, dust-proofing and hardening for
cement and cementitious surfaces - like
your steel floated floors, counter tops and
bathroom wall and floors.
CEMENTEK will adhere to damp surfaces
and also effectively stops rising moisture.
CEMENTEK is clear (not a syrup colour)
and can withstand UV and complete
submersion in water.
CEMENTEK will not yellow with time.
CEMENTEK can be used as a primer
(under new coatings to hold back damp)
or on its own as a semi gloss finish for
your cement finish project.
Can be used in ponds and dams as a
primer (to stop moisture behind our
waterproofing AQUA SEAL) or on its own
as a natural finish.
CEMENTEK is deep penetrating to form
part of your surface, rather than sitting
on top of your surface and is a concrete
densifier as opposed to simply a sealer.
CEMENTEK is a clear coat and cannot
be tinted. Cementek is to be applied
to a prepared new or existing surface.
Should one want to tint or colour the
surface before the application of
Cementek, ONLY our PRISTINA
paint should be used as it is breathable
allowing CEMENTEK to penetrate.
PRISTINA can be applied as a wash
(diluted 1:3 with water onto a pre wet
surface) or on its own (or a combination
of both to create depth to a solid colour)
FEATURES
CEMENTEK allows for:
- Application to damp uncured cement
without the risk of ensuring that the
surface is less than a certain % dry.
Can screed today and apply Cementek
the following day.
- The curing and sealing of concrete is
accomplished at once.
- Can be applied to old or new
cementitious surfaces.
- Penetrates and hardens the surface.
- No etching of the surface required
to ensure sound adhesion.
- CEMENTEK ensures that the
concrete/cement reaches its full Mpa
once cured.
- Hard-wearing of concrete floors. Stops
new concrete floors from dusting.
- Allows to paint within 48 hours of
plastering.
- Excellent water and U.V. protection
CEMENTEK other uses
- To seal bricks, concrete floors and
other porous surfaces.
- As a sealer on damp plaster without
a normal 28-day curing period, before
painting.
- As a sealer on green (not yet cured)
flat deck roofing before waterproofing
allowing the waterproofing to be applied
after 48 hours instead of normal 28-day
curing periods.
COVERAGE
On a steel floated floor, a minimum of
three coats is required (as Cementek
penetrates the surface)
A 1lt, for the three coats will cover
aprox 3 to 4sqm.
A 5lt for the three coats will cover
aprox 15 to 20sqm.
A 20lt for the three coats will cover
aprox 60 to 80sqm.
Rough surfaces will use more product.
Cementek gives a semi gloss finish,
with more coats improving the sheen.
A fine hair roller (mohair) or similar is
to be used, and product is to be spread.
TAP the roller regulary on its side to
remove product from the core of the
roller to stop line spillage on application.
Allow a minimum of 4 hours curing
between coats.
USEFUL HINTS
One can add white (or other) cement to
your screed topping to get a lighter or
different colour finish.
AVAILABILTY
CEMENTEK is shipped thoughout South
Africa and directly to you at a nominal
R110 per order with a nominal additional
cost for orders over 30kg's.
This fee is applicable to all other
products on our site.
AVAILABLE in 1lt 5lt and 20lt
CEMENTEK makes use of High Aromatic
White Spirits (HAWS) which ensures the
resin is able to penetrate and is soluble
for application.
CLEANING
Clean all equipment with lacquer thinners.
PlasterPrimer Premium 20lt
R1,998.00
DESCRIPTION
Deep penetrating PlasterPrime Premium
is a fine particle size, water-borne acrylic
with excellent alkali resistance,
water-resistance, and adhesion.
Fine particles allows for better penetration
and in depth binding.
It is off-white in colour and has been formulated
as a primer for Gypsum plaster (RhinoLite) or
cement plaster.
PlasterPrime Premium is formulated using the
latest environmentally-friendly technology.
FEATURES
It is alkali resistant.
It is water-resistant.
It has excellent adhesion.
It has very good opacity.
Improves the quality of plaster or rhinolite
It does not require any subsequent undercoats
when used on smooth, even-textured plaster.
It makes use of the latest H2O Technology for
green products.
It has a low V.O.C. count and is low in odour.
AVAILABLE IN
1lt 5lt and 20lt
Plastic Primer Spray 250ml
R164.00
Spraymate Plastic Primer is a specially
formulated primer used on surfaces made of
plastic. Plastic Primer has etching properties
enabling strong adhesion between plastic and
the top layer of paint. Plastic primer has high
coverage reducing the need for excessive
layers of the top coats. It is suitable for any
form of plastic and will not cause any warping
or dissolving of the plastic.
AVAILABLE SIZES
250 mL
Rhino Seal – Penetrating (fine particle size) Sealer 1Lt
R106.00
RHINO SEAL is a fine particle size binding
liquid, especially designed to penetrate
deeply into hard wall and fine powder
surfaces.
Rhino Seal is used for priming gypsum plaster
finishes, old chalking paint, new precast
concrete, hard surfaces e.g. super wood
or hardwood, or any absorbent
new or existing surfaces before painting.
RhinoSeal has excellent alkali and
efflorescence resistance and has been tested
to penetrate 120 microns into chalking
material in one coat with complete binding
of the loose friable material to the underlying
surface on drying.
FEATURES
- Deep penetrating - fine particle size.
- Suitable for fine powder as well as super
fine hard surfaces where adhesion of paint is
difficult.e.g Super wood and hard woods.
- Also used as a sealer on soft woods such as
pine, and like, before painting.
- Suitable for binding existing poor paint coatings
before overcoating.
- High binding properties ensuring a solid base
below your new coatings.
- Low odour
- Alkali resistant
- Fast drying.
RHINO SEAL is economical and a must use
product on hard, poor and powdery surfaces.
AVAILABLE in 1lt, 5lt and 20lt
SPREAD RATES
A 1lt will cover approx 10 to 12
sqm on a hard surface (like wood) and
approx 7 to 9 sqm on a porous surface -
(subject to porosity)
* Please note that standard water based
products will not penetrate fine powder and will
sit on the surface without effectively binding
the surface to a depth.
* RHINO SEAL contains 30% mineral
turpentine and cannot be diluted with water.
Ruscon New Tech resin bound red rustconverter 5Lt
R548.00
Rated 5.00 out of 5
DESCRIPTION
Ruscon New Tech now incorporates the
latest technology developed for rust
conversion.
Formulated to convert rust on mild steel and
galvanised iron into a tough resin coated,
chemically bonded surface, which can be
overcoated without removing rust back to
bright steel. Ruscon New Tech is non-toxic with
a VOC below 5%, making it an easy and
environmetally friendly option.
FEATURES
-It is specially formulated to convert red rust
on mild steel and galvanized iron into a tough
resin coated converted surface which can be
over-coated without removing rust back to bright
steel.
AREAS OF USE
Rusted mild steel or galvanized iron.
SURFACE PREPARATION AND APPLICATION
MILD STEEL AND GALVANISED IRON
1. By wire brush, remove only loose or flaking
rust. It is important not to remove all rust.
2. Wipe the treated area down to remove all dirt
and sanding dust.
3. Apply using a brush, roller or airless spray.
4. Apply one thin, even coat of Ruscon, ensuring
that you cover all rust completely.
Spot prime rust only.
5. Allow 24 hours curing @25C before
overcoating.
APPLICATION EQUIPMENT
Apply by Brush roller or airless spray
CLEANING EQUIPMENT
Clean all equipment with water immediately
after use.
SPREAD RATE
5Lt will cover aprox 60sqm
AVAILABLE IN
1Lt 5Lt and 20Lt
Sealermix Plaster Primer and Sealer (Lightly Pigmented) 20Lt
R852.00
Rated 5.00 out of 5
DESCRIPTION
Sealermix is a lightly pigmented, alkali
resistant plaster primer and sealer that will
penetrate plaster and effectively bind and
seal the plaster.
Sealermix is a must for scratch plaster
which is highly porous and that requires
binding.(river sand in mix)
FEATURES
-Sealermix reduces the high absorption of
paint on plaster.
-Sealermix will NOT powder and forms a
solid and sound foundation for subsequent
coats.
-Good alkali resistance.
-Sealermix has excellent binding power.
-Sealermix improves the quality of the plaster
and the paint system.
- Sealermix is slightly pigmented to assist
with the hiding power of subsequent coats.
- Sealermix can be applied to all types of
plaster, cement or concrete.
AVAILABLE IN
5Lt and 20Lt
TECHNICAL SPECIFICATIONS
Vehicle Type: Modified Acrylic
Solvent: Water
Enviro Rating: Conforms to EU 2010 V.O.C.
rules
Dilution / Thinning: This product is NOT to be
thinned
Theoretical Spread Rate: 8m per litre
Apply with Brush, Roller or Spray
Drying time: @ 25C 20 minutes. Allow 45
minutes before over coating.
Wash ability: N/A
Elongation: OK
Pigment: Pigmented
Solids Volume: N/A
Flexibility: Good
Colour: Can be tinted
Finish: Matt
Storage: Cool, dry place
Over coating: Top coat of your choice
Packaging 5L and 20L
Note: Sealermix is slightly pigmented
and therefore must be properly mixed
before application.












Reviews
There are no reviews yet.