Frosted Glass Spray Paint 312g

DESCRIPTION CEMENTEK is a sealer for cement based surfaces providing a hard wearing dust free finish that can withstand traffic, weathering and Ultra Violet (UV) CEMENTEK is a combination curing, sealing, dust-proofing and hardening for cement and cementitious surfaces - like your steel floated floors, counter tops and bathroom wall and floors. CEMENTEK will adhere to damp surfaces and also effectively stops rising moisture. CEMENTEK is clear (not a syrup colour) and can withstand UV and complete submersion in water. CEMENTEK will not yellow with time. CEMENTEK can be used as a primer (under new coatings to hold back damp) or on its own as a semi gloss finish for your cement finish project. Can be used in ponds and dams as a primer (to stop moisture behind our waterproofing AQUA SEAL) or on its own as a natural finish. CEMENTEK is deep penetrating to form part of your surface, rather than sitting on top of your surface and is a concrete densifier as opposed to simply a sealer. CEMENTEK is a clear coat and cannot be tinted. Cementek is to be applied to a prepared new or existing surface. Should one want to tint or colour the surface before the application of Cementek, ONLY our PRISTINA paint should be used as it is breathable allowing CEMENTEK to penetrate. PRISTINA can be applied as a wash (diluted 1:3 with water onto a pre wet surface) or on its own (or a combination of both to create depth to a solid colour) FEATURES CEMENTEK allows for: - Application to damp uncured cement without the risk of ensuring that the surface is less than a certain % dry. Can screed today and apply Cementek the following day. - The curing and sealing of concrete is accomplished at once. - Can be applied to old or new cementitious surfaces. - Penetrates and hardens the surface. - No etching of the surface required to ensure sound adhesion. - CEMENTEK ensures that the concrete/cement reaches its full Mpa once cured. - Hard-wearing of concrete floors. Stops new concrete floors from dusting. - Allows to paint within 48 hours of plastering. - Excellent water and U.V. protection CEMENTEK other uses - To seal bricks, concrete floors and other porous surfaces. - As a sealer on damp plaster without a normal 28-day curing period, before painting. - As a sealer on green (not yet cured) flat deck roofing before waterproofing allowing the waterproofing to be applied after 48 hours instead of normal 28-day curing periods. COVERAGE On a steel floated floor, a minimum of three coats is required (as Cementek penetrates the surface) A 1lt, for the three coats will cover aprox 3 to 4sqm. A 5lt for the three coats will cover aprox 15 to 20sqm. A 20lt for the three coats will cover aprox 60 to 80sqm. Rough surfaces will use more product. Cementek gives a semi gloss finish, with more coats improving the sheen. A fine hair roller (mohair) or similar is to be used, and product is to be spread. TAP the roller regulary on its side to remove product from the core of the roller to stop line spillage on application. Allow a minimum of 4 hours curing between coats. USEFUL HINTS One can add white (or other) cement to your screed topping to get a lighter or different colour finish. AVAILABILTY CEMENTEK is shipped thoughout South Africa and directly to you at a nominal R110 per order with a nominal additional cost for orders over 30kg's. This fee is applicable to all other products on our site. AVAILABLE in 1lt 5lt and 20lt CEMENTEK makes use of High Aromatic White Spirits (HAWS) which ensures the resin is able to penetrate and is soluble for application. CLEANING Clean all equipment with lacquer thinners.

RHINO SEAL is a fine particle size binding liquid, especially designed to penetrate deeply into hard wall and fine powder surfaces. Rhino Seal is used for priming gypsum plaster finishes, old chalking paint, new precast concrete, hard surfaces e.g. super wood or hardwood, or any absorbent new or existing surfaces before painting. RhinoSeal has excellent alkali and efflorescence resistance and has been tested to penetrate 120 microns into chalking material in one coat with complete binding of the loose friable material to the underlying surface on drying. FEATURES - Deep penetrating - fine particle size. - Suitable for fine powder as well as super fine hard surfaces where adhesion of paint is difficult.e.g Super wood and hard woods. - Also used as a sealer on soft woods such as pine, and like, before painting. - Suitable for binding existing poor paint coatings before overcoating. - High binding properties ensuring a solid base below your new coatings. - Low odour - Alkali resistant - Fast drying. RHINO SEAL is economical and a must use product on hard, poor and powdery surfaces. AVAILABLE in 1lt, 5lt and 20lt SPREAD RATES A 5lt will cover approx 50 to 60 sqm on a hard surface (like wood) and approx 35 to 45 sqm on a porous surface - (subject to porosity) * Please note that standard water based products will not penetrate fine powder and will sit on the surface without effectively binding the surface to a depth. * RHINO SEAL contains 30% mineral turpentine and cannot be diluted with water.